Hydrogel-Derived Honeycomb Ni3S4/N,P-C as an Efficient Oxygen Evolution Catalyst

The development of high-efficiency electrocatalysts with low costs for the oxygen evolution reaction (OER) is essential, but remains challenging. Herein, a new synthetic process is proposed to prepare Ni₃S₄ particles embedded in N,P-codoped honeycomb porous carbon aerogels (Ni₃S₄/N,P-HPC) through a hydrogel approach. The preparation of Ni₃S₄/N,P-HPC begins with the sol–gel polymerization of tripolyphosphate, chitosan, and guanidine polymer that contains metal-binding sites, allowing for the uniform incorporation of Ni ions into the gel matrix, freeze-drying, and subsequent carbonization under an inert atmosphere. This synthesis resolves difficulties in synthesizing the pure Ni₃S₄ phase caused by the instability of Ni₃S₄ at high temperature, while affording good control of the porous structure and N,P-doping of carbon aerogels. The synergy between the structural advantages of N,P-carbon aerogels (such as easily accessible active sites, high specific surface area, and excellent electron transport) and the intrinsic electrochemical properties of Ni₃S₄ result in the outstanding OER performance of Ni₃S₄/N,P-HPC, with overpotentials as low as 0.37 V at 10 mA cm⁻². The work outlined herein offers a simple and effective method for the development of carbon-based electrocatalysts for renewable energy conversion.     

Diversity-oriented synthesis and antifungal activities of novel pimprinine derivative bearing a 1,3,4-oxadiazole-5-thioether moiety

Molecular Diversity - Based on the strategy of diversity-oriented synthesis and the structures of natural product pimprinine and streptochlorin, two series of novel pimprinine derivatives...     

Application of persulfate with hydrodynamic cavitation and ferrous in the decomposition of pentachlorophenol

Hydrodynamic cavitation (HC) and Fe(II) are advanced oxidation processes, in which pentachlorophenol (PCP) is treated by the redox method of activating persulfate (PS). The kinetics and mechanism of the HC and Fe(II) activation of PS were examined in aqueous solution using an electron spin resonance (ESR) spin trapping technique and radical trapping with pure compounds. The optimum ratio of Fe(II)/PS was 1:2, and the hydroxyl radical (HO) and sulfate radical (SO₄⁻) generation rate were 5.56 mM h⁻¹ and 8.62 μM h⁻¹, respectively. The generation rate and R_ct of HO and SO₄⁻ at pH 3 and 50 °C in the Fe(II)/PS/HC system are 7584.6 μM h⁻¹, 0.013 and 24.02 μM h⁻¹, 3.95, respectively. The number of radicals was reduced as the pH increased, and it increased with increasing temperature. The PCP reaction rate constants was 4.39 × 10⁻² min⁻¹ at pH 3 and 50 °C. The activation energy was 10.68 kJ mol⁻¹. In addition, the mechanism of PCP treatment in the Fe(II)/PS/HC system was a redox reaction, and the HO⁻/SO₄⁻ contribution was 81.1 and 18.9%, respectively. In this study, we first examined PCP oxidation through HO and SO₄⁻ quantification using only the Fe(II)/PS/HC process. Furthermore, the results provide the foundation for activation of PS by HC and Fe(II), but also provide a data basis for similar organic treatments other than PCP.     

H2S gas sensor based on integrated resonant dual-microcantilevers with high sensitivity and identification capability

Detection of trace-level hydrogen sulfide (H₂S) gas is of great importance whether in industrial production or disease diagnosis. This research presents a novel H₂S gas sensor based on integrated resonant dual-microcantilevers which can identify and detect trace-level H₂S in real-time. The sensor consists of two integrated resonant microcantilever sensors with different functions. One cantilever sensor can identify H₂S by outputting positive frequency shift signals, while the other cantilever sensor will detect H₂S as a normally used cantilever sensor with negative frequency shifts. Combined the two cantilever sensors, the proposed gas sensor can distinguish H₂S from a variety of common gases, and the detection limit to H₂S of the sensor is as sensitive as below 1 ppb.     

Thermal Decomposition Kinetics of Ginkgo biloba Leaves Polyprenol in Nitrogen Atmosphere

The nonisothermal decomposition kinetics of Ginkgo biloba leaves polyprenol (GBP) and cleaved situation of its chemical bond during thermal decomposition process were first investigated using thermogravimetric (TG) and TG‐FTIR technology. The results of thermal decomposition kinetics revealed that the nonisothermal decomposition mechanism of GBP corresponds to first‐order chemical reaction with n = 1, integral form g(a) = –ln(1 – a) and differential form f(a) = 1 – a. TG‐FTIR results demonstrated that absorbance of –CH₃, unsaturated C–H bond, =CH₂, accumulated C=C, –OH, and so on constantly increased with thermal decomposition reaction went on. In addition, storage life of GBP was also evaluated. These data could provide theoretical guidance for purification under high temperature and other thermal application of GBP.     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons as full-spectrum light harvesting photocatalyst for environmental remediation

The inferior utilization efficiency of light is the main obstacle to the practical application of traditional photocatalysts such as TiO₂ and ZnO. In this regard, the development of novel photocatalysts with the capability of harvesting full spectrum light (from ultraviolet (UV) to near-infrared (NIR)) energy is a promising solution for solar energy conversion and environmental remediation. Here, we report the discovery of a single material that can harvest UV, visible (VIS), and NIR radiations to decompose heavy metal contaminants in aqueous solution. Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons were synthesized through a facile solution approach and employed in the reduction of Cr(VI) under UV−VIS−NIR pulsed laser irradiation, which was generated from the fundamental, second and third harmonics of Nd:YAG laser, respectively. The nanostructures showed efficient Cr(VI) reduction under UV, VIS and NIR laser irradiation and the measured reduction efficiency (%) was 71.22%, 69.52%, and 40.79%, respectively after 120 min. A possible explanation for the photocatalytic activity in Cr(VI) reduction was proposed. This is the first study of its kind where pulsed laser and ZIF-67 rhombic dodecahedrons capable of harvesting full spectrum light energy have been employed for the removal of Cr(VI) from water. The extraordinary capacity of harvesting full-spectrum light and long-term stability make ZIF-67 a potential photocatalyst for environmental remediation.     

Conjugated polymer nanoparticles with aggregation induced emission characteristics for intracellular Fe3+ sensing

In this article, a novel zwitterionic conjugated polyelectrolyte containing tetraphenylethene unit was synthesized via Pd‐catalyzed Sonogashira reaction. The resulting polymer (P2), which exhibited typical aggregation‐induced emission (AIE) properties, was weakly fluorescent in dilute DMSO solution and showed bright fluorescence emissions when aggregated in DMSO/water mixtures or fabricated into conjugated polymer nanoparticles (CPNs). The nanoparticles from P2 could be prepared by reprecipitation method with an average diameter around 23 nm. Notably, the cell‐staining efficiencies of lipid‐P2 nanoparticles could be enhanced with lipid encapsulation and these nanoparticles were endocytosed via caveolae‐mediated and clathrin‐mediated endocytosis pathways. Furthermore, the lipid‐P2 nanoparticles with low cytotoxicity, high photostability and efficient cell staining ability could be employed for in vitro detection of Fe³⁺ ions in A549 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1686–1693     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.